What are the steps of color digital tube screen customization process?
Release time:2021-02-04 14:13
Number of Views:1069
When customizing the color nixie tube screen, we need to communicate with customers according to different situations, and focus on different aspects. Customers want to customize the digital tube color display products is only a vague concept, so the content and professional characteristics of the products also have some differences, we need to evaluate the proofing professionals. General requirements provided by customers are relatively simple, such as product size, color, etc
Color nixie tube screen
1、 We need to understand the customer's desired display content first. What we need to pay attention to is that the difference between the digital tube and the LCD screen is that the pen gap of the LCD can be very small, and the pen gap of the digital tube should be at least 0.8 to 1 mm. It is impossible to be smaller than this size, so the display content of the digital tube has a small size. In addition, the thickness of the digital tube should not be less than 6 mm, usually we have to do 8 mm.
2、 We need to confirm the color of the customer's display content, especially green. There are yellow green and emerald green, and the price varies a lot. Usually red is cheap and white is expensive.
3、 There are two processes for digital tube, one is patch and the other is binding. If the size of the product is large and mostly blue or white, it is recommended that the customer do the patch process, and the relative price will be cheaper. In addition, if the customer has requirements for the working temperature, the normal working temperature of the nixie tube is - 20-70. If the temperature exceeds this, the chip lamp is good.
4、 Whether the customer has special requirements for the driver IC and voltage. The commonly used driving voltage of nixie tube is 5V, and the commonly used driving IC is tm1629, tm1624, etc.
What are the steps of color digital tube screen customization process? As follows:
1. According to the above customer's information, you can first issue the structural drawing to the customer for confirmation, and then you can arrange the quotation if the parameters are correct, or write the inquiry sheet to arrange the quotation if the parameters are confirmed.
2. Confirm the quotation, make the mold opening contract, arrange the mold fee for the customer, arrange the project to produce the true value table, and let the customer sign and send it back.
3. The project enters the model in ERP system, the customer service manager enters the customer information, and the customer service orders in ERP system according to the contract.
4. Improve product BOM.
5. PMC arranges to purchase materials, follow up materials and reply delivery date.
6. Sample to customer for confirmation, follow up the confirmation.
Color nixie tube screen
1、 We need to understand the customer's desired display content first. What we need to pay attention to is that the difference between the digital tube and the LCD screen is that the pen gap of the LCD can be very small, and the pen gap of the digital tube should be at least 0.8 to 1 mm. It is impossible to be smaller than this size, so the display content of the digital tube has a small size. In addition, the thickness of the digital tube should not be less than 6 mm, usually we have to do 8 mm.
2、 We need to confirm the color of the customer's display content, especially green. There are yellow green and emerald green, and the price varies a lot. Usually red is cheap and white is expensive.
3、 There are two processes for digital tube, one is patch and the other is binding. If the size of the product is large and mostly blue or white, it is recommended that the customer do the patch process, and the relative price will be cheaper. In addition, if the customer has requirements for the working temperature, the normal working temperature of the nixie tube is - 20-70. If the temperature exceeds this, the chip lamp is good.
4、 Whether the customer has special requirements for the driver IC and voltage. The commonly used driving voltage of nixie tube is 5V, and the commonly used driving IC is tm1629, tm1624, etc.
What are the steps of color digital tube screen customization process? As follows:
1. According to the above customer's information, you can first issue the structural drawing to the customer for confirmation, and then you can arrange the quotation if the parameters are correct, or write the inquiry sheet to arrange the quotation if the parameters are confirmed.
2. Confirm the quotation, make the mold opening contract, arrange the mold fee for the customer, arrange the project to produce the true value table, and let the customer sign and send it back.
3. The project enters the model in ERP system, the customer service manager enters the customer information, and the customer service orders in ERP system according to the contract.
4. Improve product BOM.
5. PMC arranges to purchase materials, follow up materials and reply delivery date.
6. Sample to customer for confirmation, follow up the confirmation.
